Ricoh Facsimile - Manual (Page 202)

Administrator Setting
192
9
Programming a Polling ID
Program a Polling ID to use the
Transfer Request, Transfer Station,
Default ID Polling Transmission, and
Default ID Polling Reception func-
tions. When you use ID Transmission,
program the same ID as the one pro-
grammed on the sender's machine.
Reference
p.11 “Polling Transmission”
p.14 “Polling Reception”
p.52 “Transfer Request”
p.75 “Selecting transmission op-
tions for a single transmission”
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Program Polling ID].
EEEE
Enter an ID using the number keys
and [A] to [F], and then press [OK].
Note
❒ Register a four-digit number us-
ing 0 through 9 and A through F
(expect for 0000 and FFFF).
❒ If you make a mistake, press
[Clear] or the
{{{{Clear/Stop}}}} key be-
fore pressing [OK], and then try
again.
❒ To cancel programming an ID,
press [Cancel]. The display re-
turns to that of step
D .
FFFF
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Programming a Memory Lock ID
Program a Memory Lock ID to be en-
tered before printing documents
when the Memory Lock function is
activated.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Program Memory Lock ID].
EEEE
Enter an ID using the number keys,
and then press [OK].
Note
❒ A Memory Lock ID can be any
four-digit number, except 0000.
JupterC2_Fax_EN-F_FM.book Page 192 Monday, November 29, 2004 3:48 PM