Ricoh Facsimile User Manual
Page 22
Transmission Mode
12
1
❒ Polling Transmission Clear Report
allows you to verify Polling Trans-
mission has taken place. See p.13
“Polling Transmission Clear Re-
port”. If E-mail TX Results is pro-
grammed in a Quick Operation
key, you can select whether a re-
port e-mail is sent after transmis-
sion. The destination of this report
can be selected from the e-mail ad-
dresses in the destination list.
❒ You can program one of the Quick
Operation keys with operations for
this function. Using this key allows
you to omit step
B. See p.144 “Gen-
eral Settings/Adjustment”.
❒ The communication fee is charged
to the receiver.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference
Reference
BBBB
Press [Transmission Mode].
CCCC
Press [Polling TX].
DDDD
Depending on the Polling Trans-
mission mode, use one of the fol-
lowing procedures:
Free Polling Transmission
A Check that [Free Polling TX] is se-
lected.
Default ID Transmission
A Select [Default ID TX].
ID Override Transmission
A Select [ID Override Transmission].
B Specify a 4-digit ID using the
number keys and [A], [B], [C],
[D], [E], and [F].
Note
❒ A Polling ID may be any four
numbers (0 to 9) and charac-
ters (A to F), except 0000 and
FFFF.
❒ If you make a mistake, press
[Clear]
or the
{{{{Clear/Stop}}}} key,
and then try again.
JupterC2_Fax_EN-F_FM.book Page 12 Monday, November 29, 2004 3:48 PM