Ricoh Facsimile - Manual (Page 66)

Other Transmission Features
56
4
On Hook Dial
The On Hook Dial function allows
you to dial while hearing tone from
the internal speaker. You can send a
fax checking the connection.
Limitation
❒ This function is not available for
the optional extra G3 interface
unit, Internet Fax and IP-Fax.
Note
❒ This function is unavailable in some
countries.
❒ If an Immediate TX Result Report
(Immediate Transmission) is print-
ed, On Hook Dial transmission re-
sults are not mentioned on the
report.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference
p.30 “Scan Settings”, Facsimile
Reference
BBBB
Press the
{{{{On Hook Dial}}}} key.
You will hear a low tone from the
internal speaker.
Note
❒ If you want to cancel this oper-
ation, press the
{{{{On Hook Dial}}}}
key again.
CCCC
Dial.
The machine immediately dials the
destination.
Note
❒ You can adjust the volume of
the On-hook sound by pressing
[Higher]
or [Lower] in the upper
right-hand corner of the dis-
play. The volume can also be
preprogrammed in “General
Settings and Adjustments”. See
p.83 “Adjusting the Volume”,
Facsimile Reference tures> and p.144 “General Set-
tings/Adjustment”.
❒ If you make a mistake, press the
{{{{On Hook Dial}}}} or {{{{Clear Modes}}}}
key, and then return to step B .
DDDD
When the line is connected and
you hear a high-pitched tone,
press the
{{{{Start}}}} key.
The transmission starts.
Note
❒ After transmission, the machine
returns to standby mode.
❒ If you want to cancel a transmis-
sion, press the {{{{Clear/Stop}}}} key,
and then remove the originals.
JupterC2_Fax_EN-F_FM.book Page 56 Monday, November 29, 2004 3:48 PM