Ricoh Facsimile User Manual

Page 192

Administrator Setting

182

EEEE

Check that [Program / Change] is se-
lected.

FFFF

Select a box to program.
When programming a new box,
press [* Not Programed].

Note

❒ To change a box already pro-

grammed, press it and proceed
to step

GGGG

Press [Personal Box].

HHHH

Enter a box name, and then press
[OK]

Reference

“Entering Text”, General Set-
tings Guide

IIII

Enter a SUB Code.

Note

❒ To change the SUB Code, press

[Clear]

or the

{{{{Clear/Stop}}}} key,

and then try again. To change a
Box name, press [Box Name], and
then repeat the procedure from
step

JJJJ

Specify the settings you require.
If you do not want to program a
password or receiver, proceed to
step

Programming a password

A Press [Password].
B Enter a password, and then

press [OK].

Note

❒ If you make a mistake, press

[Clear]

or the

{{{{Clear/Stop}}}} key

before pressing [OK], and
then try again.

C Re-enter the password, and

then press [OK].

Note

❒ If you make a mistake, press

[Clear]

or the

{{{{Clear/Stop}}}} key

before pressing [OK], and
then try again.

❒ To change the password after

pressing [OK], press [Change]
and repeat steps

B and C, or

press [Cancel] and repeat the
procedure from step

D Press [OK].

JupterC2_Fax_EN-F_FM.book Page 182 Monday, November 29, 2004 3:48 PM