Nortel Networks 5500 series - Manual (Page 89)

Configuring the domain 89
Group for system policies
Name: nhasystem
Creating Extended Profile 1
Giving system access when system health checks passed
Creating "green_system" vlan with id 115
Creating Extended Profile 2
Giving remediation access when system health checks failed
Creating "yellow" vlan with id 120
Not using SRS rule for system compliancy
2008 03 10 00:46
2008 03 10 00:14
Setting Activation and Earliest Push Date
Enable System Credentials
Adding user ’nhasystem’ with password ’nhasystem’ Use apply to
activate the new domain.
>> Configuration# apply
Changes applied successfully.
Deleting a domain
To delete a domain, use the following command:
/cfg/domain #/del
This command removes the current domain from the system configuration,
including all settings in menus and submenus for the portal, groups,
authentication services, linksets, and network access devices configured
for that domain.
Configuring domain parameters
To configure the domain, use the following command:
/cfg/domain
where
domain ID is an integer in the range 1 to 256 that
uniquely identifies the domain in the Nortel
SNAS cluster.
The Domain menu appears.
The Domain menu includes the following options:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.