beautypg.com

Viewing system information – Nortel Networks 5500 series User Manual

Page 339

background image

Viewing system information and performance statistics

339

Viewing system information

To view current information about system status and the system
configuration, use the following command:

/info

The Information menu appears.

The Information menu includes the following options:

/info

followed by:

certs

information about all installed certificates, including
the certificate name, serial number, expiration
date, key size, and subject information for each
certificate.

sys

information about the current system configuration,
including:

for each Nortel SNAS host in the cluster, the
Real IP address (RIP), network mask, default
gateway address, static routes, and port
configuration

system settings such as date and time, DNS
settings, Access List, and administrative
applications

NTP, DNS, syslog, audit, and other servers

For information about configuring the system, see

“Configuring system settings” (page 257)

.

sonmp

SynOptics Network Management Protocol
(SONMP) network topology information, including
the IP address, MAC address, chassis type, and
state of all Nortel SNAS and SONMP-enabled
network devices in the system.

licenses [

ID> ]

information about the global license pool and
current usage, by license type and domain. For the
Nortel SNAS, SSL is the only type of license. To
restrict the display to a specific domain, enter the
domain ID as part of the command.

ATTENTION

With Nortel Secure Network Access Switch
Software Release 1.6.1, there is only one domain
in the system.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Copyright © 2007, 2008 Nortel Networks

.

This manual is related to the following products: