Nortel Networks 5500 series - Manual (Page 130)

130 Configuration of the RADIUS server
/cfg/domain/radius
followed by:
authentication port Specify the authentication port.
Default value is 1812.
accounting port Specify the accounting port.
Default value is 1813.
Configuration of the client
To configure the client, use the following command:
/cfg/domain/radius/clients
The RADIUS Clients menu appears.
The RADIUS Clients menu includes the following options:
/cfg/domain/radius/clients
followed by:
list Lists the IP addresses of currently
configured clients, by index number.
del Removes the specified client from
the current configuration. The index
numbers of the remaining entries
adjust accordingly.
•
index number —specify the index
number.
To view the index numbers of
all configured clients use the list
command.
add Adds a client to the configuration list.
•
client IP address —the IP
address of the client.
•
shared secret —the password
used to authenticate the Nortel
SNAS to the RADIUS clients.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.