Remote network policy servers – Nortel Networks 5500 series User Manual
Page 142
142
Configuration of Microsoft NAP Interoperability
Remote Network Policy Servers
To create the remote network policy servers, use the following command:
cfg/domain/nap/servers
The Remote Network Policy Servers menu includes the following
options:
cfg/domain/nap/servers
followed by:
list
Lists the IP addresses of currently configured
remote network policy servers, by index number..
del
Removes the specified remote network policy
server from the current configuration. The
index numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured remote
network policy servers, use the
list
command.
add
secret>
Adds a server to the configuration.
•
IP address
—specify the IP address of the
server
•
port
—the TCP port number.
•
shared secret
—specify the password.
insert
number>
secret>
Inserts a server at a particular position in the list of
remote network policy server in the configuration.
•
index number
—the index number you want
the server to have
•
IPaddr
—specify the IP address of the remote
network policy serverr you are adding
•
port
—specify the TCP port number.
•
shared secret
—specify the password.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.