Nortel Networks 5500 series - Manual (Page 289)

Configuring the cluster 289
Managing RADIUS audit servers
To configure the Nortel SNAS to use external RADIUS audit servers, use
the following command:
/cfg/sys/adm/audit/servers
The RADIUS Audit Servers menu appears.
The RADIUS Audit Servers menu includes the following options:
/cfg/sys/adm/audit/servers
followed by:
list Lists the IP addresses of currently configured
RADIUS audit servers, by index number.
del Removes the specified RADIUS audit server
from the current configuration. The index
numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured
RADIUS audit servers, use the
list
command.
add Adds a RADIUS audit server to the
configuration. You are prompted to enter
the following information:
•
IPaddr —the IP address of the audit server
•
port —the TCP port number used for
RADIUS auditing. The default is 1813.
•
shared secret —the password used to
authenticate the Nortel SNAS to the audit
server
The system automatically assigns the next
available index number to the server.
insert Inserts a server at a particular position
in the list of RADIUS audit servers in the
configuration.
•
index number —the index number you
want the server to have
•
IPaddr —the IP address of the audit server
you are adding
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.