Nortel Networks 5500 series - Manual (Page 225)

Managing system users and groups 225
>> User cert_admin# password
Enter admin’s current password: ( admin user password)
Enter new password for cert_admin: (new password for user
being edited)
Re-enter to confirm: (confirm new password for user being
edited)
5 Apply the changes.
>> User cert_admin# apply
Changes applied successfully.
--End--
Deleting a user
To delete a user from the system, you must be a member of the admin
group. By default, only the admin user is a member of the admin group.
ATTENTION
Remember that when a user is deleted, that user’s group assignment is also
deleted. If you are deleting a user who is the sole member of a group, none of
the remaining users on the system can then be added to that group. Existing
users can only be added to a group by a user who is already a member of that
group. Before deleting a user, you may therefore want to verify that the user is
not the sole member of a group.
Step Action
1 Log on to the Nortel SNAS cluster as the admin user.
login: admin
Password: ( admin user password)
2 Access the User Menu.
>> Main# /cfg/sys/user
---------------------------------------------------
---------
[User Menu]
passwd - Change own password
list - List all users
del - Delete a user
add - Add a new user
edit - Edit a user
>> User#
3 Specify the user name of the user you want to remove from the
system configuration.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.