Nortel Networks 5500 series - Manual (Page 166)

166 Configuring groups and profiles
Figure 7
Extended Profile menu commands
Creating RADIUS attributes to a group
To create a RADIUS Attribute to a group, access the Group RADIUS
Attributes menu from the Group menu. Use the following command:
/cfg/doamin #/aaa/group #/radattr
The Group RADIUS Attributes menu appears.
The Group RADIUS Attributes menu includes the following options:
Table 29
Configure RADIUS Attributes
/cfg/doamin #/aaa/group #/radattr
followed by:
list Lists the currently configured RADIUS attributes by
index number.
del Removes the RADIUS attribute entry represented
by the specified index number. The index numbers
of the remaining entries adjust accordingly.
add Adds a RADIUS attribute to the group. You can
add as many RADIUS attributes as you want.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.