Nortel Networks 5500 series - Manual (Page 453)

Syslog messages by message type 453
Table 74
Operating system messages—ERROR
Message Category Explanation/Action
Config filesystem corrupt ERROR Possible loss of configuration. Followed by the
message:
Config filesystem re-initialized -
reinstall required
or
Config filesystem restored from
backup .
Missing files in config filesystem ERROR Possible loss of configuration. Followed by the
message:
Config filesystem re-initialized -
reinstall required
or
Config filesystem restored from
backup .
Logs filesystem re-initialized ERROR Loss of logs.
Root filesystem repaired -
rebooting ERROR fsck found and fixed errors. Probably OK.
Config filesystem restored from
backup ERROR Loss of recent configuration changes.
Rebooting to revert to permanent
OS version ERROR Happens after Config filesystem
re-initialized - reinstall required
or Config filesystem restored from
backup if software upgrade is in progress (in
other words, if failure at first boot on new OS
version).
System Control Process messages
There are three categories of System Control Process messages:
• INFO (see Table 75 "System control process messages—INFO" (page
454) )
•
ALARM (see Table 77 "System Control Process messages—ALARM"
(page 455) )
•
EVENT (see Table 78 "System Control Process messages—EVENT"
(page 456) )
Events and alarms are stored in the event log file. You can access the
event log file by using the
/info/events/download command. You
can view active alarms by using the /info/events/alarms command.
For more information, see “Viewing system information and performance
statistics” (page 337) .
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.