Nortel Networks 5500 series - Manual (Page 335)

Configuring SNMP 335
/cfg/sys/adm/snmp/event
followed by:
addmonitor [
] -x
[present|absent| changed]
Adds an existence monitor and trigger as
defined in the DISMAN-EVENT-MIB.
Valid are:
•
-c —adds a comment
•
-f —the sampling
interval, in seconds. The default is 600
(10 minutes).
•
-o —additional objects to send
in the event
•
-e —the name of a
notification event
•
-d —the delta discontinuity OID
•
-D timeTicks|timeStamp|dateAnd
Time —the delta discontinuity type
Other parameters are:
•
name —a unique name you assign to
the monitor, for identification
•
OID —the object identifier (or symbolic
name) to monitor
•
present|absent|changed —indicate
s whether the object being monitored is
present, absent, or has changed
delmonitor Removes the specified monitor from the
configuration.
addevent [-c ]
[
]
Adds a notification event as defined in the
DISMAN-EVENT-MIB.
•
-c —adds a comment
(optional)
•
name —a unique name you assign to
the event, for identification
•
notification —the OID (or symbolic
name) of the notification
•
OID... —additional notification OIDs
(optional)
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.