Nortel Networks 5500 series - Manual (Page 113)

Configuring the domain 113
Table 14
Managing RADIUS accounting servers (cont’d.)
/cfg/domain #/aaa/radacct/servers
followed by:
add Adds a RADIUS accounting server to the
configuration. You are prompted to enter the
following information:
•
IPaddr —the IP address of the accounting
server
•
port —the TCP port number used for
RADIUS accounting. The default is 1813.
•
shared secret —the password used
to authenticate the Nortel SNAS to the
accounting server
Shared secret must be same in NSNA and
RADIUS server.
The system automatically assigns the next
available index number to the server.
insert Inserts a server at a particular position in
the list of RADIUS accounting servers in the
configuration.
•
index number —the index number you
want the server to have
•
IPaddr —the IP address of the accounting
server you are adding
The index number you specify must be in use.
The index numbers of existing servers with this
index number and higher are incremented by
1.
move
index number>
Moves a server up or down the list of RADIUS
accounting servers in the configuration.
•
index number —the original index number
of the server you want to move
•
new index number —the index number
representing the new position of the server
in the list
The index numbers of the remaining entries
adjust accordingly.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.