Nortel Networks 5500 series - Manual (Page 449)

CLI command reference 449
Table 70
Boot menu commands
Command Parameters/Submenus Purpose
/boot software
halt
reboot
delete
Manage Nortel
SNAS software and
devices.
/boot/software cur
activate
version>
download
del
View, download,
and activate
software versions
for the Nortel SNAS
device to which you
are connected.
Maintenance menu
The Maintenance menu contains commands used to perform maintenance
and management activities for the system and individual Nortel SNAS
devices.
Table 71 "Maintenance menu commands" (page 449) lists the
Maintenance commands.
Table 71
Maintenance menu commands
Command Parameters/Submenus Purpose
/maint log
dumplogs
dumpstats
chkcfg list | chkcfg
[all-isds |one-isds]
[item...][syslog]
starttrace
a|dhcp|dns|ssl|tg|snas|
patchlink|radius|nap)>
[]
stoptrace
Check the applied
configuration and
download log file
and system status
information for
technical support
purposes.
/maint/log in-memory
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.