Nortel Networks 5500 series - Manual (Page 325)

Configuring SNMP 325
Command Parameter
privpasswd
del
/cfg/sys/adm/snmp/target ip
port
version v1 | v2c | v3
del
/cfg/sys/adm/snmp/event addmonitor [] -b
addmonitor [] -t
addmonitor [] -x
[present|absent|changed]
delmonitor
addevent [-c ]
[]
delevent
list
Configuring SNMP settings
To configure SNMP management of the Nortel SNAS cluster, use the
following command:
/cfg/sys/adm/snmp
The SNMP menu appears.
The SNMP menu includes the following options:
/cfg/sys/adm/snmp
followed by:
ena Enables network management using
SNMP. The default is enabled.
dis Disables network management using
SNMP.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.