Introduction – Nortel Networks 5500 series User Manual
Page 17
17
.
Introduction
Nortel* Secure Network Access (Nortel SNAS ) is a clientless solution that
provides seamless, secure access to the corporate network from inside
or outside that network. The Nortel SNAS combines multiple hardware
devices and software components to support the following features:
•
partitions the network resources into access zones (authentication,
remediation, and full access)
•
provides continual device integrity checking using Nortel Health Agent
•
supports both dynamic and static IP clients
The Nortel Secure Network Access Switch 4050or 4070 (Nortel SNAS
4050 or 4070) controls operation of the Nortel SNAS.
This user guide covers the process of implementing the Nortel SNAS using
the Nortel SNAS 4050 or 4070 for Nortel Secure Network Access Switch
Software Release 2.0. The document includes the following information:
•
overview of the role of the Nortel SNAS 4050 or 4070 in the Nortel
SNAS
•
initial setup
•
configuring authentication, authorization, and accounting (AAA)
features
•
managing system users
•
customizing the portal
•
upgrading the software
•
logging and monitoring
•
troubleshooting installation and operation
The document provides instructions for initializing and customizing the
features using the Command Line Interface (CLI). To learn the basic
structure and operation of the Nortel SNAS CLI, refer to
. This reference guide provides links to where the function
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.