Nortel Networks 5500 series - Manual (Page 133)

Configuration of the dictionary 133
Configuration of the dictionary
To configure the dictionary, use the following command:
/cfg/domain/radius/dictionary
The RADIUS Attribute Dictionary menu appears.
The RADIUS Attribute Dictionary menu includes the following options:
/cfg/domain/radius/dictionary
followed by:
default Sets default RADIUS attribute configuration.
import Imports dictionary from TFTP/FTP/SCP/SFT
P server.
•
protocol —protocol is the import
protocol. Options are tftp|ftp|scp|sftp.
Default value is tftp.
•
server —specify the hostname or IP
address of the server.
•
filename —specify the name of the
database file on the server.
export Exports dictionary to TFTP/FTP/SCP/SFTP
server.
•
protocol —protocol is the export
protocol. Options are tftp|ftp|scp|sftp.
Default value is tftp.
•
server —specify the hostname or IP
address of the server.
•
filename —is a name of the database
file on the server.
•
vender id —corresponds to the
vendor-specific attribute used by the
RADIUS server.
view Views the vendor dictionary.
delete Removes the specified vendor dictionary.
•
index number —is the identification
number automatically assigned to the
dictionary when you added the dictionary
to the configuration.specify the index
number to remove.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.