Nortel Networks 5500 series - Manual (Page 288)

288 Configuring system settings
Step Action
1 In the RADIUS server dictionary, define a descriptive string (for
example,
NSNAS-SSL-Audit-Trail ).
2 Map this string to the Vendor-Type value.
--End--
Configuring RADIUS auditing
To configure the Nortel SNAS to support RADIUS auditing, use the
following command:
/cfg/sys/adm/audit
The Audit menu appears.
The Audit menu includes the following options:
/cfg/sys/adm/audit
followed by:
servers Accesses the RADIUS Audit Servers menu,
in order to configure external RADIUS audit
servers for the cluster (see
“Managing RADIUS
audit servers” (page 289) ).
vendorid Corresponds to the vendor-specific attribute
used by the RADIUS audit server to identify
event log information from the Nortel SNAS
cluster.
The default Vendor-Id is 1872 (Alteon).
vendortype Corresponds to the Vendor-Type value used
in combination with the Vendor-Id to identify
event log information from the Nortel SNAS
cluster.
The default Vendor-Type value is 2
(Alteon-ASA-Audit-Trail).
ena Enables RADIUS auditing.
The default is disabled.
dis Disables RADIUS auditing.
The default is disabled.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.