Nortel Networks 5500 series - Manual (Page 143)

Configuration of NAP Interoperability 143
cfg/domain/nap/servers
followed by:
The index number you specify must be in use. The
index numbers of existing servers with this index
number and higher are incremented by 1.
move Moves a server up or down the list of remote
network policy server in the configuration.
•
index number —the original index number of
the server you want to move
•
new index number —the index number
representing the new position of the server in
the list
The index numbers of the remaining entries adjust
accordingly.
System Health Validators
To create the system health validators, use the following command:
cfg/domain/nap/shvs
The System Health Validators menu includes the following options:
cfg/domain/nap/shvs
followed by:
list Lists the vendor ID, component ID and module
name.
del Removes the specified system health validators
from the current configuration. The index numbers
of the remaining entries adjust accordingly.
To view the index numbers of all configured remote
network policy servers, use the
list command.
add Adds a system health validators to the configuration.
•
vendor ID —specify the vender ID.
•
component ID —specify the component ID.
•
module name —specify the module name.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.