Nortel Networks 5500 series User Manual
Page 374
374
Upgrading or reinstalling the software
b If the core router attaches VLAN tag IDs to incoming packets,
specify the VLAN tag ID used.
c
Specify the host IP address for the device.
d Specify the network mask.
e
Specify the default gateway IP address.
Select a network port (1-4, or i for info) [1]:
Enter VLAN tag id (or zero for no VLAN tag) [0]:
Enter IP address for this iSD [192.168.128.185]:
Enter network mask [255.255.255.0]:
Enter gateway IP address [192.168.128.1]:
3
Specify the download details:
a
protocol for the download method
b server IP address
c
file name of the boot image
d user name and password, if the server does not support
anonymous logon. The default is anonymous.
Select protocol (tftp/ftp/scp/sftp) [tftp]:
Enter
Enter file name of boot image: NSNAS-x.x.x-boot.img
Enter FTP Username [anonymous]:
Password:
Downloading boot image...
Installing new boot image...
Done
ATTENTION
For some TFTP servers, files larger than 16 MB may cause the
update to fail.
4
Wait for the Nortel SNAS to reboot on the newly installed boot
image.
Restarting...
Restarting system.
Alteon WebSystems, Inc.
0004004C
Booting...
Login:
5
Log on as the admin user to enter the Setup menu and perform
the initial setup of the Nortel SNAS device (see
--End--
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.