Nortel Networks 5500 series - Manual (Page 168)

168 Configuring groups and profiles
To map a linkset to a group, access the Linksets menu from the Group
menu. Use the following command:
/cfg/doamin #/aaa/group #/linkset
To map a linkset to an extended profile, access the Linksets menu from
the Extended Profile menu. Use the following command:
/cfg/doamin #/aaa/group #/extend #/linkset
The Linksets menu appears.
The Linksets menu includes the following options:
Table 30
Mapping linksets
/cfg/doamin #/aaa/group #[/extend #]/linkset
followed by:
list
Lists the currently configured linksets by index
number.
del Removes the linkset entry represented by the
specified index number. The index numbers of the
remaining entries adjust accordingly.
add Adds a linkset to the group or extended profile.
The linkset on the portal page after the user has
been authenticated. You can add as many linksets
as you want.
The Nortel SNAS assigns an index number to the
linkset name as you add the linkset to the list for
the group. The linksets display on the portal page
in the order of the index numbers.
insert
number>
name>
Inserts a linkset at a particular position in the list.
The index numbers of existing linkset entries with
this index number and higher are incremented by
1.
move Moves a linkset entry up or down the list. The
index numbers of the remaining entries adjust
accordingly.
Figure 9 "Linksets menu commands" (page 169) shows a sample output
for the /cfg/doamin #/aaa/group /linkset command
and commands on the Linksets menu.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.