Nortel Networks 5500 series - Manual (Page 280)

280 Configuring system settings
/cfg/sys/syslog
The Syslog Servers menu appears.
The Syslog Servers menu includes the following options:
/cfg/sys/syslog
followed by:
list Lists the IP addresses and facility numbers of
all configured syslog servers, by index number.
del Removes the specified syslog server from the
system configuration. The index numbers of
the remaining entries adjust accordingly.
To view the index numbers of all configured
syslog servers, use the
list command.
add Adds a syslog server to the system
configuration. You are prompted to enter
the following information
•
IPaddr —the IP address of the syslog
server
•
facility —the local facility number, to
uniquely identify syslog entries. For more
information about the local facility number,
see the manual page for
syslog.conf
under UNIX.
The system automatically assigns the next
available index number to the server.
insert Assigns a specific index number to the syslog
server you add.
•
index number —the index number you
want the server to have
•
IPaddr —the IP address of the syslog
server you are adding
•
facility —the local facility number, to
uniquely identify syslog entries. For more
information about the local facility number,
see the manual page for
syslog.conf
under UNIX.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.