Nortel Networks 5500 series - Manual (Page 445)

CLI command reference 445
Command Parameters/Submenus Purpose
/cfg/sys/adm/snmp/event addmonitor [-c Comment]
[-f Freq] [-o OID]* [-b
|-t | -x ...] Name Oid
...
delmonitor
addevent [-c Comment>]
Name Notification
[OID...]
delevent
list
Configure monitors
and events defined
in the DISMAN-EVE
NT-MIB.
/cfg/sys/adm/snmp/snmpv2-mib sysContact
snmpEnable disabled|ena
bled
Configure
parameters in the
standard SNMPv2
MIB.
/cfg/sys/adm/snmp/target
ID>
ip
port
version v1|v2c|v3
del
Configure
notification targets.
/cfg/sys/adm/snmp/users
ID>
name
seclevel none|auth|priv
permission get|set|trap
authproto md5|sha
authpasswd
privproto des|aes
privpasswd
del
Manage SNMPv3
users in the Nortel
SNAS configuration.
/cfg/sys/adm/srsadmin port
ena
dis
Configure support
for managing the
SRS rules.
/cfg/sys/adm/sshkeys generate
show
knownhosts
Generate and view
the SSH keys used
by all hosts in the
cluster for secure
management
communications.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.