Nortel Networks BCM1000 - Manual (Page 238)

238 Chapter 16 Preparing hardware for maintenance or upgrades
P0607659 02
Shutting down the system software
The Business Communications Manager system requires a controlled shutdown to guarantee the
integrity of the file system. Sometimes this may not be possible, for instance if a hard drive fails.
However, as long as you have access to the Unified Manager, perform the following procedures
before removing power from the system:
1 Start a web browser on a computer with a LAN connection to the Business Communications
Manager system.
2 Enter the IP address of the Business Communications Manager system and the port number
for Business Communications Manager Unified Manager (:6800).
For example: http://10.10.10.1:6800.
3 Click the Configure button.
4 Type your user name in the Login box. The default user name is supervisor .
5 Type your password in the Password box. The default password is visor .
6 Choose System.
7 Click the Logoff menu and then click Shutdown.
8 Click the Yes button.
9 Wait until the Status changes to Complete! It is safe to turn off the system.
10 Click the Done button.
11 Quit the web browser.