Nortel Networks BCM1000 - Manual (Page 104)

104 Chapter 2 Telephony hardware
P0607659 02
Norstar M7100 —
one-line display,
one memory
button, without
indicator.
Norstar M7100N
(UK and Australia
only) — same
features
Norstar M7208
— one-line
display, eight
memory buttons
with indicators.
Norstar M7208N
(UK and Australia
only) same
features
Norstar M7310
— two-line
display with
three display
buttons, 10
memory buttons
with indicators,
12 dual memory
buttons without
indicators.
Norstar M7310N (UK/Australia only) — same
features
Audio Conference Unit
(ACU)— provides large-room
audio conferencing. The
keypad provides many of the
set features of the basic Norstar
M-series telephones without
display or memory buttons.
This set comes with three
microphones. Installation
instructions are provided by the vendor.
Mobility options
Companion (region-specific) — provides twinning
capability between a stationary set and a wireless
mobile set. These handsets communicate through a
stationary base station, which is wired to a digital
station media bay module on the BCM1000 or
BCM1000e. Depending on your system
configuration, you can have up to 64 sets assigned
to your system. For installation instructions, refer to
“Installing the Companion hardware” on page 193 .
Provides two-line display, but no line, memory or
display buttons. The handset accesses a restricted
set of system features.
T7406 Cordless Telephone system —
provides cordless mobility in a small
office environment. Each base station
supports three telephones. Function is
based on the T7316/M7310 telephone.
The base station connects to a digital
station media bay module on the system.
Provides six memory buttons with
indicators and a two-line display with
three display buttons.
For installation instructions, refer to the
T7406 Cordless Telephone Installation Guide.
DECT (region-specific) — provides cordless
access to the system through a DECT media bay
module. The cordless handsets can be twinned with
a stationary set, or configured to act as an
independent set. You can register up to 32 sets on a
module. Each Business Communications Manager
system can support one DECT module.
Has display, but no line, display or memory buttons
and has access to a restricted list of system features.
For base station installation and handset registration
instructions, refer to the DECT Installation and
Maintenance Guide.
Symbol® NetVision and
NetVision Data
telephones — H.323+
based IP telephones
provide eMobility access
through a LAN/WAN
connection via a wireless
access point. A display
menu provides access to
user and call feature.
Provides multi-line display
capability, but no line, memory or display buttons.
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
1 2 3
4 5 6
7 8 9
0 #
FCT MENU
NAME RCL
STO CLR
SND
END
1 2 ABC 3 DEF
5 JKL 4 GHI 6 MNO
8 TUV 7 PQRS 9 WXYZ
0 OPR < # >
HOLD
< >
FCT NAME HOLD
CLR STO RCL
MENU
2 1 ABC 3 DEF
5 4 JKL GHI 6 MNO
8 7 TUV PQRS 9 WXYZ
0 OPR # < >
END SND