Palm Pre P100EWW - Manual (Page 59)

Chapter 4 : Phone 59
After you set up a connection with a Bluetooth headset or hands-free car kit,
you can communicate using that device whenever it is within range and the
Bluetooth feature on your phone is turned on. The range varies greatly,
depending on environmental factors. The maximum is about 10 meters.
NOTE You can use a stereo (A2DP-enabled) Bluetooth headset or speakers to
listen to music files on your phone. You cannot, however, use a mono Bluetooth
headset to listen to music files.
1 Open Bluetooth .
2 If the Bluetooth setting at the top of the screen is off, tap Off to switch
the Bluetooth feature from Off to On.
3 Tap Add device and tap the device name.
4 To use a Bluetooth device with your phone, follow the instructions that
came with the Bluetooth device.
5 To switch to another Bluetooth device while on a call: Tap and tap
the new device name. You can also tap Handset or Speaker to use
your phone without the headset.
For more information on using the Bluetooth feature on your phone, see
Bluetooth ® wireless technology .
Customize phone settings
Use Phone Preferences to customize phone settings.
Show contact matches
By default, when you have the dial pad displayed but you’re using the
keyboard to enter a phone number, both numbers and letters appear and
your phone performs a search of matching names in Contacts. If you turn off
this preference, typing on the keyboard with the dial pad displayed enters
numbers only, and no search is done in Contacts.
1 Open Phone .
2 Open the application menu and tap Preferences .
3 In Show Contact Matches , tap On or Off .
TIP If you make a Bluetooth connection with a car kit, you might get a notification
on your phone asking if you want to upload contacts to the car kit. Tap Allow to
upload contacts. If you later want to delete the contacts from the car kit, check the
car kit documentation for instructions.