Connect to a previously used network, Disconnect from a network, Customize connection settings – Palm Pre P100EWW User Manual
Page 126: Connect to a, Previously used network
126
Chapter 8 : Web and wireless connections
•
If the network you want is not displayed: Tap
Join network
and
enter the network name. Follow steps 4 to 7.
4
Tap the
Security
field, and then tap the network type:
Open
,
WPA-personal
,
WEP
, or
Enterprise
.
5
Tap
Connect
.
6
A series of different screens appears depending on the network type.
Enter or select the following if you are prompted to do so:
Username
and/or
Password
, and
Certificate
.
7
Tap
Sign In
.
Connect to a previously used network
•
If Wi-Fi is turned off: Turn on Wi-Fi (see
). Your phone
automatically attempts to connect to a previously used network, starting
with the most recently used network.
•
If Wi-Fi is turned on but you are not connected to a network: Your phone
automatically attempts to connect to a previously used network, starting
with the most recently used network.
•
If you are connected to one network and want to use a different one:
Wi-Fi
. Tap another network name.
Disconnect from a network
When you disconnect from a network, you can keep it on your list of known
networks so that your phone can automatically connect to it again. If you
remove the network from your list of known networks, however, you must
reconnect to the network. Follow the steps in
Connect to a new secure network
to connect to the network
again.
•
To disconnect from a network but keep it on your list of known networks:
Turn off Wi-Fi (see
). This disconnects from the network.
•
To disconnect from a network and remove it from your list of known
networks: Open
Wi-Fi
. Tap the network name, and then tap
Forget
Network
.
Customize connection settings
Do not change Wi-Fi settings unless you are having trouble connecting to a
network.
BEFORE YOU BEGIN
You must be connected to the network you want to
customize (see
Connect to a previously used network
1
Wi-Fi
.
2
Tap the network name.
3
In
Automatic IP settings
, tap
On
or
Off
.
•
When Automatic IP Settings are on: The IP address is automatically
and dynamically configured.
•
When Automatic IP Settings are off: You can manually configure the
IP address.