To use quick connect from the address list, To configure quick connect settings, Tap-to-connect – Palm TUNGSTEN T2 User Manual
Page 96: To enable tap-to-connect
Chapter 5
Using Address Book
82
To use Quick Connect from the Address list:
1.
Highlight the Address entry to which you want to connect.
2.
Tap the Menu icon
.
3.
Select Connect on the Record menu.
4.
Select the method you want to use to connect.
Quick Connect initiates the related task. For example, if you tap a phone
number, Quick Connect sends the selected phone number to your mobile
phone.
To configure Quick Connect settings:
1.
From the Quick Connect dialog box, tap Settings.
2.
(Optional) Tap the Number Prefix check box and enter a prefix.
For example, to dial 1 before all phone numbers, select this check box and enter
a “1” in this field. The prefix is not added to a number that begins with the “+”
character.
3.
Tap each of the pick lists and select the application you want to associate with
that task.
4.
Tap OK.
Tap-to-Connect
With Tap-to-Connect you can select an entry and initiate a related task by tapping
it with the stylus. By default, Tap-to-Connect is not enabled.
To enable Tap-to-Connect:
1.
From the Address list, tap the Menu icon
.
2.
Select Option, and then select Preferences.
3.
Tap Enable Tap-to-Connect.
4.
Tap OK.