Palm TUNGSTEN T2 - Manual (Page 482)

Product Regulatory Information
468
MPE (Maximum Permissible Exposure) Statement
RF Exposure Compliance:
In order for this device to comply with FCC rules, under the provision of Part 15.247(b)(c), it must
operate in a manner that ensures that the public is not exposed to radio frequency energy levels in
excess of the Maximum Permissible Limits (MPE).
It is recommended that the antenna of this device be placed at 20 cm or more from its user and any
nearby persons, during continuous and extended data transmission. The users of this device should
ensure that the operation of this device is in compliance with these provisions.
Canadian IC Notice
Certification No: 3905-550007A
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment that is installed outdoors is
subject to licensing.
Canadian ICES-003 Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel
brouilleur du Canada.
FAA Statement
Whenever you use the wireless features of your handheld, please observe the guidelines or
prohibitions on the use of wireless devices in your current location. For example, when you are on an
airplane, do not use the Bluetooth™ communication features of your handheld at times when
government or airline regulations prohibit the use of cellular phones. You can, of course, use all other
applications on your handheld in accordance with airline regulations for electronic devices.
Electrical Transmission Statement
This product has been certified as conforming to technological standards for a wireless device as a
small electrical data transmission under electrical transmission law. Therefore, you do not need a
license from a government agency to operate this product.
This product has been certified as conforming to technological standards. Therefore, the following
action are punishable by law:
Disassembly or modification of this product.
Removal of identification labels on the back of this product.