beautypg.com

Idle timeout, To set the idle timeout, Defining primary and secondary dns – Palm TUNGSTEN T2 User Manual

Page 428

background image

Chapter 22

Setting Preferences for Your Handheld

414

3.

Tap Details.

Idle timeout

The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.

To set the Idle timeout:

1.

Tap the Idle timeout pick list and select one of the following options:

2.

Tap OK.

Defining primary and secondary DNS

The domain name system (DNS) is a mechanism in the Internet for translating the
names of host computers into IP addresses. When you enter a DNS number (or IP
address), you are identifying a specific server that handles the translation services.

Each IP address has four sections, separated by periods. In the Details dialog box,
you enter each section separately. Each section of an IP address is made up of a
number from 0 to 255; numbers are the only allowable characters in this field.

Ask your ISP or system administrator for the correct primary or secondary DNS IP
address.

Many systems do not require that you enter a DNS IP address. If you are not sure,
leave the DNS field blank.

1 minute

Waits one minute for you to open another application before
it drops the connection.

2 minutes

Waits two minutes.

3 minutes

Waits three minutes.

Never

Keeps your PPP or SLIP connection until you turn off your
handheld (or until it times out).