Palm TUNGSTEN T2 - Manual (Page 202)

Chapter 17 Using Palm™ VersaMail™ Personal E-mail Software
188
To add a personal signature:
1. Tap the Attach Signature to messages check box, and then enter the text of the
signature.
This signature is attached to all your outgoing e-mail.
2. Tap Next.
Setting advanced outgoing mail options
You can set additional outgoing mail options.
To set advanced outgoing mail options:
1. (Optional) Select any of the following:
Port Number The default is 25, the port number most SMTP servers use. If
you are not sure about the correct port number, check with
your mail server administrator.
Authentication Select the My server requires authentication (ESMTP) check
box if the outgoing server (SMTP) requires authentication.
Check with your system administrator before selecting this
option. See
“Adding ESMTP to an account” later in this
chapter for information. If you select this option, username
and password fields appear. These fields are prepopulated
based on the account information you entered previously. In
most cases, the prepopulated information is correct;
however, occasionally your authentication username and/or
password is different from your account username or
password. Check with your e-mail service provider for
authentication username and password information.
If you need to enter new information, enter a username
and/or tap the Password box and enter a password, and
then tap OK.
Signature lines appear only if
check box is selected