Konica Minolta Magicolor 5440 DL - Manual (Page 86)

Main Unit Field Service Other
2-49
II Main
tena
nce
4.4.23 Developing Motor /K (M5)
1. Remove PWB Box/1.
☞ 2-47
2.
Disconnect the connector [1], and
remove four screws [2] and the
Developing Motor/K [3].
NOTE
• When installing the Developing
Motor /K, try to insert it straight,
and take care not to damage the
gears.
4.4.24 Toner Supply Motor /Y, M (M6)
1. Remove PWB Box/1.
☞ 2-47
2.
Disconnect the connector [1], and
remove two screws [2] and the Toner
Supply Motor/Y,M [3].
NOTE
• When installing the Toner Supply
Motor /Y, M, try to insert it straight,
and take care not to damage the
gears.
4.4.25 Toner Supply Motor /C, K (M7)
1. Remove PWB Box/1.
☞ 2-47
2.
Disconnect the connector [1], and
remove two screws [2] and the Toner
Supply Motor/C,K [3].
NOTE
• When installing the Toner Supply
Motor /C, K, try to insert it straight,
and take care not to damage the
gears.
[1]
[2]
[3]
4138fs2027c0
[1]
[2]
[3]
4138fs2028c0
[1]
[2]
[3]
4138fs2029c0
5450_E.book_PDF.book 49 ページ ２００５年４月１２日 火曜日 午後１２時５４分