Konica Minolta Magicolor 5440 DL User Manual
Page 163

Menu (magicolor 5450)
Main Unit Field Service
3-60
III
Ad
just
men
t/Set
ting
B. TCP/IP /IP ADDRESS
C. TCP/IP /SUBNET MASK
D. TCP/IP /DEFAULT GATEWAY
Function
• Sets the IP address of the printer used for the network.
Use
• To set the printer’s IP address.
Setting
/procedure
1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “TCP/IP” and press the MENU/SELECT key.
3. Select “IP ADDRESS” and press the MENU/SELECT key.
4. Set “Desired IP ADDRESS (first bite)” with the Up key
U/Down keyV and press the
Right key
Z.
5. Repeat the above procedures and set the IP address up to fourth bite.
6. Press the MENU/SELECT key.
• The default setting is “000.000.000.000.”
“000.000.000.000” to “255.255.255.255”
NOTE
• When setting the IP address manually, “DHCP/BOOTP” (IP auto acquisition
function) setting must be set to “NO.”
• When “DHCP/BOOTP” (IP auto acquisition function) is activated, the IP
address is set automatically within the range “169.254.0.0. to 169.254.255.255.”
Function
• Sets the subnet mask of the printer used in the network.
Use
• To set the printer’s subnet mask.
Setting
/procedure
1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “TCP/IP” and press the MENU/SELECT key.
3. Select “SUBNET MASK” and press the MENU/SELECT key.
4. Set “Desired SUBNET MASK (first bite)” with the Up key
U/Down keyV and press
the Right key
Z.
5. Repeat the above procedures and set the SUBNET MASK up to fourth bite.
6. Press the MENU/SELECT key.
• The default setting is “000.000.000.000.”
“000.000.000.000” to “255.255.255.255”
Function
• Sets the gateway address of the printer used in the network.
Use
• To set the printer’s gateway address.
Setting
/procedure
1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “TCP/IP” and press the MENU/SELECT key.
3. Select “DEFAULT GATEWAY” and press the MENU/SELECT key.
4. Set “Desired DEFAULT GATEWAY ADDRESS (first bite)” with the Up key
U/Down
key
V and press the Right keyZ.
5. Repeat the above procedures and set the DEFAULT GATEWAY ADDRESS up to
fourth bite.
6. Press the MENU/SELECT key.
• The default setting is “000.000.000.000.”
“000.000.000.000” to “255.255.255.255”
5450_E.book_PDF.book 60 ページ 2005年4月12日 火曜日 午後12時54分