Konica Minolta Magicolor 5440 DL - Manual (Page 153)

Menu (magicolor 5450) Main Unit Field Service
3-50
III
Ad
just
men
t/Set
ting
7.4.2 DUPLEX
7.4.3 COPIES
7.4.4 COLLATE
Function • Sets duplex printing mode.
Use • To specify duplex printing.
Setting
/procedure OFF: Duplex print is OFF
LONG EDGE: Duplex print is ON, long edge
SHORT EDGE: Duplex print is ON, short edge
1. Select “DUPLEX” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “OFF.”
OFF LONG EDGE SHORT EDGE
NOTE
• This menu is available only when a Duplex Option is installed.
Function • Sets the number of prints.
Use • To specify the number of copies of the job to be printed.
Setting
/procedure 1. Select “COPIES” and press the MENU/SELECT key.
2. Select “Desired print number” with the Up key
U/Down keyV and press the MENU/
SELECT key.
• The default setting is “1” copy.
“1” copy to “9999” copies.
Function • Sets printing in sets.
Use • To print several sets of multiple pages.
Setting
/procedure ON: Print in sets.
OFF: Print in page
1. Select “COLLATE” and press the MENU/SELECT key.
2. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “OFF.”
ON OFF
NOTE
• This menu is available only when an optional Hard Disk unit is installed.
• The setting in the printer driver overrides the setting in this menu.
5450_E.book_PDF.book 50 ページ ２００５年４月１２日 火曜日 午後１２時５４分