Konica Minolta Magicolor 5440 DL - Manual (Page 167)

Menu (magicolor 5450) Main Unit Field Service
3-64
III
Ad
just
men
t/Set
ting
C. POSTSCRIPT /PS ERROR PAGE
D. POSTSCRIPT /PS PROTOCOL
E. PCL / CR/LF MAPPING
Function • Specifies whether error pages are printed at the time of a PostScript error.
Use • To specify whether error pages are printed after a PostScript error occurs.
Setting
/procedure ON: Error pages are printed at the time of PostScript error.
OFF: Error pages are not printed at the time of PostScript error.
1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “POSTSCRIPT” and press the MENU/SELECT key.
3. Select “PS ERROR PAGE” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “OFF.”
ON OFF
Function • Sets the protocol to be used for PostScript printing.
Use • To specify the PostScript protocol.
Setting
/procedure AUTO: Automatic recognition
NORMAL: ASCII letter code data
BINARY: Binary data
1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “POSTSCRIPT” and press the MENU/SELECT key.
3. Select “PS PROTCOL” and press the MENU/SELECT key.
4. Select “Desired protocol” and press the MENU/SELECT key.
• The default setting is “AUTO.”
AUTO NORMAL BINARY
Function • Sets the linefeed code for PCL printing.
Use • To specify the type of linefeed to be used for PCL printing.
Setting
/procedure 1. Select “EMULATION” and press the MENU/SELECT key.
2. Select “PCL” and press the MENU/SELECT key.
3. Select “CR/LF MAPPING” and press the MENU/SELECT key.
4. Select “Desired linefeed code” and press the MENU/SELECT key.
• The default setting is “CR=CR LF=LF.”
CR=CR LF=LF CR=CRLF LF=LF CR=CR LF=LFCR CR=CRLF LF=LFCR
5450_E.book_PDF.book 64 ページ ２００５年４月１２日 火曜日 午後１２時５４分