Konica Minolta Magicolor 5440 DL - Manual (Page 112)

Main Unit Field Service Description of the Control Panel (magicolor 5430 DL /5440 DL)
3-9
III
Ad
just
men
t/Set
ting
3.2.6 Malfunction messages
☞ For details of malfunction messages and troubleshooting procedures, see “IV Trouble-
shooting.”
*: The lower the message in the above list, the higher the priority.
Message Description
ILLEGAL ERROR
DUPLEX
• A Duplex Option is not installed.
• A 2-sided print cycle has been initiated using a type and size of media not
supported for 2-sided printing.
ERROR
AIDC SENSOR
• The AIDC Sensor is faulty.
FATAL ERROR
CODE:XXXX
• The Engine or Controller is faulty.
ERROR
COMMUNICATION
• A communications error has occurred in the USB or Ethernet interface.
ERROR
ENGINE INTERFACE • There is a connection fault between the Mechanical Control Board (PWB-A)
and Print Control Board (PWB-P).
ERROR
RAM
• An error has occurred during RAM read/write operations.
ERROR
DIMM
• A fault has occurred in SDRAM DIMM.
ERROR
ROM
• An error has occurred in ROM.
ERROR
CONTROLLER
• A fault has occurred in the controller.
5450_E.book_PDF.book 9 ページ ２００５年４月１２日 火曜日 午後１２時５４分