Konica Minolta Magicolor 5440 DL - Manual (Page 155)

Menu (magicolor 5450) Main Unit Field Service
3-52
III
Ad
just
men
t/Set
ting
7.5 QUALITY MENU
7.5.1 COLOR MODE
7.5.2 BRIGHTNESS
7.5.3 PCL CONTRAST
7.5.4 PS PROFILE
A. SIMULATION PROF
Function • Sets the color mode for printing.
Use • To specify whether jobs should be printed in color or grayscale.
Setting
/procedure 1. Select “COLOR MODE” and press the MENU/SELECT key.
2. Select “Desired color mode” and press the MENU/SELECT key.
• The default setting is “COLOR.”
COLOR GRAYSCALE
Function • Sets the brightness of the printed image.
Use • To adjust the brightness of the printed image.
Setting
/procedure 1. Select “BRIGHTNESS” and press the MENU/SELECT key.
2. Select “Desired adjustment” with the Up key
U/Down keyV and press the MENU/
SELECT key.
• The default setting is “0 %.”
-15 % -10 % -5 % 0 % +5 % +10 % +15 %
Function • Sets the contrast of a PCL printed image.
Use • To adjust the contrast of a PCL printed image.
Setting
/procedure 1. Select “PCL CONTRAST” and press the MENU/SELECT key.
2. Select “Desired adjustment” with the Up key
U/Down keyV and press the MENU/
SELECT key.
• The default setting is “0%.”
-15 % -10 % -5 % 0 % +5 % +10 % +15 %
Function • Sets the simulation profile.
Use • To set a CMYK simulation profile at implementation of the simulation.
Setting
/procedure SWOP...DIC: Profile that has been preset at the printer.
Custom profile: Custom profile that has been downloaded to the printer by users.
1. Select “PS PROFILE” and press the MENU/SELECT key.
2. Select “SIMULATION PROF” and press the MENU/SELECT key.
3. Select “Desired profile” and press the MENU/SELECT key.
• The default setting is “NONE.”
NONE /SWOP /Euroscale /CommercialPress /TOYO /DIC /Custom Profile...
5450_E.book_PDF.book 52 ページ ２００５年４月１２日 火曜日 午後１２時５４分