Konica Minolta Magicolor 5440 DL - Manual (Page 186)

Main Unit Field Service Service Menu (magicolor 5450)
3-83
III
Ad
just
men
t/Set
ting
F. TRANSFER POWER /MANUAL DUPLEX
8.3.4 TRANSFER POWER /IMAGE ADJ PARAM
Function • Adjusts the transfer power when manually duplexed pages have image quality prob-
lems (void areas or white spots).
Use • To correct manually duplexed pages with image quality problems (void areas or white
spots) due to the characteristics of the media being used.
Setting
/procedure PLAIN PAPER: Adjust the image quality (void areas, white spot) of plain paper.
THICK 1: Adjust the image quality (void areas, white spot) of thick paper 1.
THICK 2: Adjust the image quality (void areas, white spot) of thick paper 2.
POSTCARD: Adjust the image quality (void areas, white spot) of postcard.
ENVELOPE: Adjust the image quality (void areas, white spot) of envelope.
• If void areas occurs, adjust in the plus levels.
• If white spots occurs, adjust in the minus levels.
1. Select “TRANSFER POWER” and press the MENU/SELECT key.
2. Select “MANUAL DUPLEX” and press the MENU/SELECT key.
3. Select “Desired paper type” and press the MENU/SELECT key.
4. Select “Desired adjustment amount” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “0.”
“-8” to “+7” (16 steps)
Function • Adjusts the Printer in case of an image quality problem (uneven density)
Use • To correct image quality problems (uneven density) due to the Printer being operated
at a high altitude.
Setting
/procedure 1. Select “IMAGE ADJ PARAM” and press the MENU/SELECT key.
2. Select “Desired adjustment amount” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “0.”
0 1 2 3
NOTE
• When the setting has been changed, be sure to run a CALIBRATION/AIDC
process.
☞
3-57
5450_E.book_PDF.book 83 ページ ２００５年４月１２日 火曜日 午後１２時５４分