Konica Minolta Magicolor 5440 DL - Manual (Page 173)

Menu (magicolor 5450) Main Unit Field Service
3-70
III
Ad
just
men
t/Set
ting
7.7.8 ENERGY SAVER TIME
7.7.9 MENU TIMEOUT
7.7.10 LCD BRIGHTNESS
Function • Sets the amount of time before the machine enters Energy Saver mode after the last
print is received or the last key operated.
Use • To change the amount of time before the machine enters Energy Saver mode.
Setting
/procedure 1. Select “ENERGY SAVER TIME” and press the MENU/SELECT key.
2. Select “Desired auto delete time” with the Up key
U/Down keyV and press the
MENU/SELECT key.
• The default setting is “30 minutes.”
15 minutes 30 minutes 1 hour 4 hours
NOTE
• This menu is available only when “ENERGY SAVER” is set to “ON.”
Function • Sets the amount of time before the Control Panel returns to the status screen from
menu mode and the help display.
Use • To set the amount of the time before the Control Panel returns to the status screen
from the menu and the help display.
Setting
/procedure 1. Select “MENU TIMEOUT” and press the MENU/SELECT key.
2. Select “Desired time” with the Up key
U/Down keyV and press the MENU/SELECT
key.
• The default setting is “2 minutes.”
OFF 1 minute 2 minutes
Function • Sets the brightness of the Control Panel LCD display.
Use • To set the brightness of the Control Panel LCD display.
Setting
/procedure 1. Select “LCD BRIGHTNESS” and press the MENU/SELECT key.
2. Select “Desired brightness” with the Up key
U/Down keyV and press the MENU/
SELECT key.
The default setting is “0.”
-3 -2 -1 0 +1 +2 +3
5450_E.book_PDF.book 70 ページ ２００５年４月１２日 火曜日 午後１２時５４分