Konica Minolta Magicolor 5440 DL - Manual (Page 180)

Main Unit Field Service Menu (magicolor 5450)
3-77
III
Ad
just
men
t/Set
ting
7.7.15 ENABLE WARNING
A. PAPER EMPTY /TRAY1
B. PAPER EMPTY /TRAY2
C. PAPER EMPTY /TRAY3
Function • Specifies whether a “TRAY 1 Paper Empty” (Manual Feed Tray) is displayed as a
Normal message when it is empty.
Use • To specify whether to display a “TRAY 1 Paper Empty” message as a Normal
message.
Setting
/procedure ON: “Paper empty message” is displayed on Normal message when Tray is empty.
OFF: “Paper empty message” is not displayed on Normal message when Tray is empty.
1. Select “ENABLE WARNING” and press the MENU/SELECT key.
2. Select “PAPER EMPTY” and press the MENU/SELECT key.
3. Select “TRAY 1” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “OFF.”
OFF ON
Function • Specifies whether a “TRAY 2 Paper Empty” is displayed as a Normal message when
it is empty.
Use • To specify whether to display a “TRAY 2 Paper Empty” message as a Normal
message.
Setting
/procedure ON: “Paper empty message” is displayed on Normal message when Tray is empty.
OFF: “Paper empty message” is not displayed on Normal message when Tray is empty.
1. Select “ENABLE WARNING” and press the MENU/SELECT key.
2. Select “PAPER EMPTY” and press the MENU/SELECT key.
3. Select “TRAY 2” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “ON.”
OFF ON
Function • Specifies whether a “TRAY 3 Paper Empty” is displayed as a Normal message when
it is empty.
Use • To specify whether to display a “TRAY 3 Paper Empty” message as a Normal
message.
Setting
/procedure ON: “Paper empty message” is displayed on Normal message when Tray is empty.
OFF: “Paper empty message” is not displayed on Normal message when Tray is empty.
1. Select “ENABLE WARNING” and press the MENU/SELECT key.
2. Select “PAPER EMPTY” and press the MENU/SELECT key.
3. Select “TRAY 3” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “ON.”
OFF ON
NOTE
• This menu is available only when an optional Lower Feeder Unit is installed.
5450_E.book_PDF.book 77 ページ ２００５年４月１２日 火曜日 午後１２時５４分