Konica Minolta Magicolor 5440 DL - Manual (Page 283)

Miscellaneous Malfunctions Duplex Option Field Service Ver. 2.0 April 2005
3-6
III
T
roub
lshoo
t
in
g
1.5.4 Undefined misfeed
A. Detection Timing
B. Action
2. Miscellaneous Malfunctions
2.1 List of miscellaneous malfunctions
2.2 ILLEGAL ERROR DUPLEX
Type Description
Detection of unde-
fined misfeed
Conflicting settings are made in the printer driver.
Relevant Electrical Parts
Print Control Board (PWB-P) Mechanical Control Board (PWB-A)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Check printer driver settings. - -
2 Change PWB-P. - -
3 Change PWB-A. - -
Message Description
ILLEGAL ERROR
DUPLEX
• The Duplex Option is not installed.
• A 2-sided print cycle, using a media size and type that are not supported for
2-sided printing, was requested.
Relevant Electrical Parts
Duplex Board (PWB-E DU) Mechanical Control Board (PWB-A)
Print Control Board (PWB-P)
Step Action
WIRING DIAGRAM
Control signal
Location
(electrical
component)
1 Check the printer driver settings. - -
2
Check the PWB-E DU connector for proper con-
nection and correct as necessary.
- -
3
Check the PWB-A connector for proper connec-
tion and correct as necessary.
- -
4
Check the PWB-P connector for proper connec-
tion and correct as necessary.
- -
5 Change PWB-E DU. - -
6 Change PWB-P. - -
7 Change PWB-A. - -
5450_E.book_PDF.book 6 ページ ２００５年４月１２日 火曜日 午後１２時５４分