Konica Minolta Magicolor 5440 DL - Manual (Page 162)

Main Unit Field Service Menu (magicolor 5450)
3-59
III
Ad
just
men
t/Set
ting
7.6 INTERFACE MENU
7.6.1 JOB TIMEOUT
7.6.2 ETHERNET
NOTE
• When the “ETHERNET” setting is changed, the printer restarts automatically.
A. TCP/IP /ENABLE
Function • Sets the time to activate JOB TIMEOUT.
Use • To specify the amount of time before a print job times out.
Setting
/procedure 1. Select “JOB TIMEOUT” and press the MENU/SELECT key.
2. Select “Desired JOB TIME OUT activation time” with the Up key
U/Down keyV and
press the MENU/SELECT key.
• The default setting is “15 seconds.”
“5 seconds” to “300 seconds”
Function • Enables TCP/IP
Use • To specify that the printer is connected to a TCP/IP network.
Setting
/procedure YES: Enable TCP/IP. Print can be made at TCP/IP environment.
NO: Disable TCP/IP. Print cannot be made at TCP/IP environment.
1. Select “ETHERNET” and press the MENU/SELECT key.
2. Select “TCP/IP” and press the MENU/SELECT key.
3. Select “ENABLE” and press the MENU/SELECT key.
4. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “YES.”
YES NO
NOTE
• The screen displays “IP ADDRESS,” “SUBNET MASK,” “DEFAULT GATEWAY,”
and “DHCP/BOOTP” only when “ENABLE/YES” is selected.
5450_E.book_PDF.book 59 ページ ２００５年４月１２日 火曜日 午後１２時５４分