Konica Minolta Magicolor 5440 DL User Manual
Page 152
Main Unit Field Service
Menu (magicolor 5450)
3-49
III
Ad
just
men
t/Set
ting
E. TRAY 2-4/PAPER SIZE
F.
TRAY 2-4/PAPER TYPE
G. TRAY CHAINING
Function
• Sets the paper size for Trays 2 to 4.
Use
• To specify the size of media loaded in Trays 2 to 4.
Setting
/procedure
1. Select “PAPER SOURCE” and press the MENU/SELECT key.
2. Select “Desired feed tray (TRAY 2-4)” and press the MENU/SELECT key.
3. Select “PAPER SIZE” and press the MENU/SELECT key.
4. Select “Desired paper size” and press the MENU/SELECT key.
For North America
• The default setting is “LETTER.”
For other destinations
• The default setting is “A4.”
TRAY2: LETTER* /LEGAL /EXECUTIVE /GOVT LEGAL /A4* /B5(JIS)
TRAY3/4: LETTER* /A4*
NOTE
• TRAY3/TRAY4 can be selected only when one or more optional Lower Feeder
Units are installed.
Function
• Sets the paper type for Trays 2 to 4.
Use
• To specify the type of media loaded in Trays 2 to 4.
Setting
/procedure
1. Select “PAPER SOURCE” and press the MENU/SELECT key.
2. Select “Desired feed tray (TRAY 2-4)” and press the MENU/SELECT key.
3. Select “PAPER TYPE” and press the MENU/SELECT key.
4. Select “Desired paper type” and press MENU/SELECT key.
• The default setting is “PLAIN PAPER.”
ANY
PLAIN PAPER
RECYCLED
NOTE
• TRAY3/TRAY4 can be selected only when one ore more optional Lower Feeder
Units are installed.
• ANY identifies any media type.
Function
• Sets auto tray switching.
Use
• To specify that the printer should pull media from another tray when the specified tray
runs is empty.
Setting
/procedure
1. Select “PAPER SOURCE” and press the MENU/SELECT key.
2. Select “TRAY CHAINING” and press the MENU/SELECT key.
3. Select “Desired setting” and press the MENU/SELECT key.
• The default setting is “ON.”
ON
OFF
5450_E.book_PDF.book 49 ページ ２００５年４月１２日 火曜日 午後１２時５４分