Konica Minolta Magicolor 5440 DL - Manual (Page 211)

Malfunction code Main Unit Field Service
4-24
IV
T
roub
lshoo
t
in
g
2.4.24 C050: Hard disk access error (Only for magicolor 5450)
2.4.25 C051: Hard disk full error (Only for magicolor 5450)
Relevant Electrical Parts
Print Control Board (PWB-P) Hard disk unit (HDD)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Turn OFF the Power Switch of the printer and
turn it ON again (Restart of the printer.)
- -
2
Check the HDD connector for proper connection
and correct as necessary.
- -
3
Check the PWB-P connector for proper connec-
tion and correct as necessary.
- -
4 Change HDD. - -
5 Change PWB-P. - -
Relevant Electrical Parts
Print Control Board (PWB-P) Hard disk unit (HDD)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Turn OFF the Power Switch of the printer and
turn it ON again (Restart of the printer.)
- -
2
Delete the job hold in “PROOF/PRINT MENU” to
increase the available range for user space.
- -
3
Check the HDD connector for proper connection
and correct as necessary.
- -
4
Format HDD with “SYS DEFAULT MENU/HDD
FORMAT.”
- -
5 Change HDD. - -
5450_E.book_PDF.book 24 ページ ２００５年４月１２日 火曜日 午後１２時５４分