Konica Minolta Magicolor 5440 DL - Manual (Page 260)

Mechanical Adjustment Lower Feeder Unit Field Service Ver. 2.0 April 2005
3-2
III
Ad
just
men
t/Set
ting
2. Mechanical Adjustment
2.1 Registration adjustment
This adjustment must be made if:
• The printed image deviates in the CD direction.
1. Remove the tray.
2. Loosen two screws [1].
3. Loosen two screws [2].
4. Watching the graduations [3] on the
adjusting plate, move the Edge
Guide Plate [4] as necessary.
Adjustment range: ± 2.0 mm
5. Tighten the four screws that have
been loosened and mount the tray.
[1]
4537fs3501c0
[2]
[2]
4537fs3502c0
[3]
[4]
5450_E.book_PDF.book 2 ページ ２００５年４月１２日 火曜日 午後１２時５４分