Siemens AC75 - Manual (Page 95)

AC75 AT Command Set
3.4 AT+CEER
s
AC75_ATC_V01.002 Page 95 of 569 10/30/06
Confidential / Released
3.4.5 GSM release cause for Mobility Management (MM) or Session
Management (SM)
6 Confirm ABORT of the MM
7 Respond to DEACT REQ
8 Loss of coverage
9 Reestablishment not possible
10 T3122_STILL_RUNNING
11 CELL_SELECTION_IN_PROGRESS
12 RESPONDING_TO_PAGING
13 LOCATION_AREA_CODE_HAS_CHANGED
14 CIRCUIT_SWITCHED_NOT_AVAILABLE
Number Description
Causes related to MS identification
2
IMSI unknown in HLR
3 Illegal MS
4 IMSI unknown in VLR
5 IMEI not accepted
6 Illegal ME
Cause related to subscription options
11
PLMN not allowed
12 Location Area not allowed
13 Roaming not allowed in this location area
Causes related to PLMN specific network failures and congestion
17
Network failure
22 Congestion
Causes related to nature of request
25
PDP context is deactivated because of a LLC or SNDCP failure
32 Service option not supported
33 Requested service option not subscribed
34 Service option temporarily out of order
38 Call cannot be identified
Causes related to invalid messages
95
Semantically incorrect message
96 Invalid mandatory information
97 Message type non-existent or not implemented
98 Message not compatible with protocol state
99 Information element non-existent or not implemented
100 Conditional information element error
101 Messages not compatible with protocol state
Number Description