Siemens AC75 - Manual (Page 286)

AC75 AT Command Set
10.8 AT^SISW
s
AC75_ATC_V01.002 Page 286 of 569 10/30/06
Confidential / Released
SMTP SMTP service sends some "closing" commands to the SMTP server which are necessary to
mark the email as successfully sent on the server. The service enters "Closing" state and
remains in it until the final protocol exchange with the SMTP server has been completed.
The "OK" response following
AT^SISW
indicates that the SMTP service has accepted the last
data - IT DOES NOT indicate the successful completion of the SMTP service.
Successful completion will be indicated either by the appropriate URC "^SISW:x,2" or due to
the fact that the SMTP service state changes to "Down" state without any error.
HTTP / POP3 Parameter not applicable, i.e. value is ignored.
Service type