Siemens AC75 - Manual (Page 17)

AC75 AT Command Set
1.3 Document conventions
s
AC75_ATC_V01.002 Page 17 of 569 10/30/06
Confidential / Released
1.3.2 Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type Meaning
(num) Parameter value must be numeric type
(str) Parameter value must be string type
Parameter option Meaning
(&W) Parameter value will be stored with
AT&W
(&V) Parameter value will be displayed with
AT&V
(ˆSNFW) Parameter value will be stored with
AT^SNFW
(+CSCS) Parameter value has to be (is) coded according to current setting of (see
AT+CSCS
for details)
Value option Meaning
[x] Default value: if the parameter is omitted, the value 'x' will be assumed
x (&F) Factory default value, will be restored to 'x' with
AT&F
x (P) Powerup default value of a parameter which is not stored at power down
x (D) Delivery default value of a parameter which cannot be restored automatically