Siemens AC75 - Manual (Page 384)

AC75 AT Command Set
13.14 AT+CSCB
s
AC75_ATC_V01.002 Page 384 of 569 10/30/06
Confidential / Released
13.14 AT+CSCB Select Cell Broadcast Message Indication
The test command returns the supported modes as a compound value.
The write command selects which types of CBMs are to be received by the ME.
Syntax
Parameter Description
Message mode
[0]
(&F) Accept messages that are defined in and
1 Forbid messages that are defined in and
Cell Broadcast Message ID specification
• For
=0: Six different possible combinations of CBM IDs (e.g. "0,1,5,320-478,922,2000-3000"), default
is empty string.
In certain configurations, e.g. if using SIMs that contain data in Elementary File EF-CBMID (Cell Broadcast
Message Identifier for Data download) less than six combinations may be available.
To access a SIM's Elementary File data refer to command
AT+CRSM
.
• For =1: One CBM ID or range of IDs (e.g. "320-478"), default is empty string.
CBM data coding scheme specification
All different possible combinations of CBM data coding schemes (e.g. "0-3,5"). Using default empty string leads
to get all CBMs independent of their dcss.
A given replaces any former value and is used for consecutive requests.
Test Command
AT+CSCB=?
Response(s)
+CSCB:
(list of supported s)
OK
Read Command
AT+CSCB?
Response(s)
+CSCB:
, ,
OK
Write Command
AT+CSCB=
[ [, [, ]]]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 + + + + + + + - + -
(num)
(str)
(str)